Thermally induced cyclization of L‐isoleucyl‐L‐alanine in solid state: Effect of dipeptide structure on reaction temperature and self‐assembly

Thermal treatment of short‐chain oligopeptides is able to initiate the process of their self‐assembly with the formation of organic nanostructures with unique properties. On the other hand, heating can lead to a chemical reaction with the formation of new substances with specific properties and ability to form structures with different morphology. Therefore, in order to have a desired process, researcher needs to find its temperature range. In the present work, cyclization of _L‐isoleucyl‐_L‐alanine dipeptide in the solid state upon heating was studied. Kinetic parameters of this reaction were estimated within the approaches of the nonisothermal kinetics. The correlation between side chain structure of dipeptides and temperature of their cyclization in the solid state was found for the first time. This correlation may be used to predict the temperature, at which dipeptide self‐assembly changes to chemical reaction. The differences in self‐assembly of linear and cyclic dipeptides were demonstrated using atomic force microscopy. The effect of dipeptide concentration in a source solution and an organic solvent used on self‐assembly of dipeptides was shown. The new information obtained on the thermal properties and self‐assembly of linear and cyclic forms of _L‐isoleucyl‐_L‐alanine may be useful for the design of new nanomaterials based on oligopeptides, as well as for the synthesis of cyclic oligopeptides.     

Soil microbes alter plant fitness under competition and drought

Plants exist across varying biotic and abiotic environments, including variation in the composition of soil microbial communities. The ecological effects of soil microbes on plant communities are well known, whereas less is known about their importance for plant evolutionary processes. In particular, the net effects of soil microbes on plant fitness may vary across environmental contexts and among plant genotypes, setting the stage for microbially mediated plant evolution. Here, we assess the effects of soil microbes on plant fitness and natural selection on flowering time in different environments. We performed two experiments in which we grew Arabidopsis thaliana genotypes replicated in either live or sterilized soil microbial treatments, and across varying levels of either competition (isolation, intraspecific competition or interspecific competition) or watering (well‐watered or drought). We found large effects of competition and watering on plant fitness as well as the expression and natural selection of flowering time. Soil microbes increased average plant fitness under interspecific competition and drought and shaped the response of individual plant genotypes to drought. Finally, plant tolerance to either competition or drought was uncorrelated between soil microbial treatments suggesting that the plant traits favoured under environmental stress may depend on the presence of soil microbes. In summary, our experiments demonstrate that soil microbes can have large effects on plant fitness, which depend on both the environment and individual plant genotype. Future work in natural systems is needed for a complete understanding of the evolutionary importance of interactions between plants and soil microorganisms.     

No evidence of inbreeding depression in fast declining herds of migratory caribou

Identifying inbreeding depression early in small and declining populations is essential for management and conservation decisions. Correlations between heterozygosity and fitness (HFCs) provide a way to identify inbreeding depression without prior knowledge of kinship among individuals. In Northern Quebec and Labrador, the size of two herds of migratory caribou (Rivière‐George, RG and Rivière‐aux‐Feuilles, RAF) has declined by one to two orders of magnitude in the last three decades. This raises the question of a possible increase in inbreeding depression originating from, and possibly contributing to, the demographic decline in those populations. Here, we tested for the association of genomic inbreeding indices (estimated with 22,073 SNPs) with body mass and survival in 400 caribou sampled in RG and RAF herds between 1996 and 2016. We found no association of individual heterozygosity or inbreeding coefficient with body mass or annual survival. Furthermore, those genomic inbreeding indices remained stable over the period monitored. These results suggest that the rapid and intense demographic decline of the herds did not cause inbreeding depression in those populations. Although we found no evidence for HFCs, if demographic decline continues, it is possible that such inbreeding depression would be triggered.     

Simulation and evaluation of 3D traction force microscopy

Measuring cell-generated forces by Traction Force Microscopy (TFM) has become a standard tool in cell mechanobiology. Although widely used in two dimensional (2D) experiments, only a few methods exist to measure traction in three-dimensional (3D) cell culture, since 3D volumetric high-resolution microscopy and more demanding computational approaches are required. Although it is commonly known that the selected experimental and computational setup highly influence the quality and accuracy of the results, no existing methods can adequately assess the errors involved in this process. We present a fully integrated simulation and evaluation platform that allows one to simulate TFM images and quantify errors of an applied approach for traction stress reconstruction, in order to improve experiments that attempt to measure mechanical interaction in cellular systems. In this context, we show that a careful parameter selection can decrease the reconstructed traction error by up to 40%.     

Heterozygosity at neutral and immune loci is not associated with neonatal mortality due to microbial infection in Antarctic fur seals

Numerous studies have reported correlations between the heterozygosity of genetic markers and fitness. These heterozygosity–fitness correlations (HFCs) play a central role in evolutionary and conservation biology, yet their mechanistic basis remains open to debate. For example, fitness associations have been widely reported at both neutral and functional loci, yet few studies have directly compared the two, making it difficult to gauge the relative contributions of genome‐wide inbreeding and specific functional genes to fitness. Here, we compared the effects of neutral and immune gene heterozygosity on death from bacterial infection in Antarctic fur seal (Arctocephalus gazella) pups. We specifically developed a panel of 13 microsatellites from expressed immune genes and genotyped these together with 48 neutral loci in 234 individuals, comprising 39 pups that were classified at necropsy as having most likely died of bacterial infection together with a five times larger matched sample of healthy surviving pups. Identity disequilibrium quantified from the neutral markers was positive and significant, indicative of variance in inbreeding within the study population. However, multilocus heterozygosity did not differ significantly between healthy and infected pups at either class of marker, and little evidence was found for fitness associations at individual loci. These results support a previous study of Antarctic fur seals that found no effects of heterozygosity at nine neutral microsatellites on neonatal survival and thereby help to refine our understanding of how HFCs vary across the life cycle. Given that nonsignificant HFCs are underreported in the literature, we also hope that our study will contribute toward a more balanced understanding of the wider importance of this phenomenon.     

Breeding Potential of Some Exotic Tomato Lines: A Combined Study of Morphological Variability,Genetic Divergence,and Association of Traits

Tomato (Solanum lycopersicum L.) is called ‘the poor man’s orange’ due to its low price and improved nutritional values. An experiment was conducted to study the breeding potential of some exotic tomato lines by assessing various qualitative and quantitative traits conferring yield and quality attributes. Among the qualitative traits, greater variability was observed for growth type, stem hairiness, and fruit shape and size. A determinate growth habit was observed in the genotype AVTO9802 while the genotype AVTO0102 produced yellow color fruits. A significant (p ≤ 0.01) variation was also observed for the studied quantitative traits. Based on yield and traits attributed to yield, the genotypes AVTO0314, GPB0107, GPB0120 and AVTO9802 were selected as promising genotypes. The differences between the genotypic and phenotypic coefficients of variation (GCV and PCV) of the studied quantitative traits were very low. This suggests that the apparent variation was mainly due to the genotypes. The higher GCV and PCV values were observed for the number of primary branches plant⁻¹ (NPB), number of fruits cluster⁻¹ (NFC), individual fruit weight (IFW) and total soluble solids (TSS). High heritability was recorded for all quantitative traits in a broad sense. However, the individual fruit diameter showed the highest heritability (99.56). The highest (102.75) genetic advance (GA) was observed for the number of fruits plant⁻¹ (NFP). High heritability coupled with high GA as percentage of mean were recorded for the traits NFP, NFC, fruit yield plant⁻¹ (FYP) and IFW. FYP showed a significant positive correlation with NFC (0.714***) and a negative correlation with days to the first harvest (−0.539***) and plant height (−0.492**). Principal component analysis revealed that the first four components explained 78.5% of the total variation among the genotypes. Thus, the promising genotypes (AVTO0314, GPB0107, GPB0120, AVTO9802 and AVTO0102) isolated from this study can be used for developing high-yielding and high-quality tomato varieties.     

Rice (<i>Oryza sativa</i> L.) Breeding among Hassawi Landrace and Egyptian Genotypes for Stem Borer (<i>Chilo agamemnon</i> Bles.) Resistance and Related Quantitative Traits

Rice stem borer (Chilo agamemnon Bles.) is a primary insect pest of rice and is a major limiting factor to rice production. Breeding for insect-resistant crop varieties has been an economic way of integrated pest management (IPM) as it offers a viable and ecologically acceptable approach. This study was aimed to evaluate rice genotypes for their resistance against rice stem borer. Seven parental genotypes with twenty one F1 crosses were evaluated for genotypic variation in field experiments. Analysis of variance revealed significant differences for the studied traits in almost all crosses and parents. In addition, the mean squares of parents versus their crosses were signifi- cant for stem borer resistance and other associated traits. Moreover, both general combining ability (GCA) and specific combining ability (SCA) variances were highly significant for all characters studied in the F1 generation. Based on GCA, 4 genotypes (Sakha101, Gz6903-3-4-2-1, Gz9577-4-1-1 and Hassawi) exhibited highly significant negative values for stem borer resistance (–0.53, –1.06, –0.18 and –0.49, respectively) indicating they are the best combiners for stem borer resistance. Based on SCA analysis, nine cross combinations showed highly significant negative effects for stem borer resistance. Similarly, the cross Giza178 Hassawi was the best combination with significantly highest value for early maturity. In addition, seven crosses showed highly significant negative SCA for plant height trait. On the other hand, for panicle length, number of primary branches/panicle, panicle weight and 1000-grain weight, seven, four, eight and six crosses showed highly significant positive SCA, respectively. The result further revealed that the non-additive dominance genetic variance was higher than the additive variance for all evaluated traits indicating that non-additive genetic variances have a role in their inheritance. The broad-sense heritability estimates were high for all the studied traits. The stem borer resistance was significantly correlated with panicle weight and 1000-grain weight, which also showed a highly significant correlation with grain yield/plant. Thus these traits can be effectively employed in a breeding program to confer resistance against stem borer infestation in rice. It was further supported by biplot analysis, which clustered these potentially important traits into two quadrants showing their importance in any future breeding program to control stem borer infestation. This study has contributed valuable information for evaluation of genetic diversity in the local rice germplasm and its utilization in futuristic rice genetic improvement programs.     

长潭水库铁锰含量与环境因子的季节性变化相关性分析及铁锰氧化菌群的富集培养

【背景】目前对水库水体污染原因的研究往往专注于水体的富营养化、pH值、溶解氧、氨氮、菌落总数指标的变化,而重金属含量与环境因子的季节性变化相关性分析研究较少,同时对于典型季节原位微生物种群的多样性差异研究尚未见报道。【目的】研究浙江省台州市长潭水库底部水中正二价金属离子(二价锰离子Mn²⁺;二价铁离子Fe²⁺)浓度与不同环境因子的季节性变化规律,并对其相关性进行分析;富集平水期(2月)和丰水期(8月)水库底部水体中功能微生物菌群,分析其种类和丰度的差异。【方法】分别检测12个月的水库水Mn²⁺和Fe²⁺浓度及多种环境因子(水体溶解氧浓度、pH值、总磷浓度、浊度、水库环境温度及降水量),过滤并富集培养水库底部水体的功能微生物菌群,对其16S rRNA基因V3-V4区测序并分析其菌群结构。【结果】长潭水库水中Mn²⁺和Fe²⁺浓度呈季节性变化,每年的春夏交替季节水体中铁锰含量从零开始慢慢升高,至夏秋高温季节水体中Mn²⁺和Fe²⁺浓度达到最高值,然后慢慢降低,至秋末冬初检测不到含量。在检测的多种环境因子中,水体溶解氧浓度、水库环境温度及降水量呈明显的季节性规律变化。Mn²⁺和Fe²⁺浓度与温度、降水量和浊度有正相关性,与溶解氧浓度、pH值和总磷浓度有负相关性,其中在正负相关性分析中两种金属离子的浓度与溶解氧浓度的相关性最强,其次是环境温度及降水量。丰水期和平水期中富集获得的功能微生物菌群的种类和丰度差异很大,从属水平上分类,丰水期时菌群只包含不动杆菌(Acinetobacter)和鲑色沉积物杆状菌(Sediminibacterium)这2个属的菌株,含量各占约50%;平水期时菌群则主要由杆菌属(Bacillariophyta) (47.62%)和Limnohabitans(9.52%)等9个属的菌株构成。富集获得的平水期和丰水期的两个可培养的菌群均具有去除水库水中Mn²⁺的功能,去除率分别约为35.9%和11.4%。【结论】长潭水库底部水体中Mn²⁺和Fe²⁺浓度与不同环境因子均呈季节性规律变化,它们之间呈现不同的正负相关性,丰水期和平水期的功能微生物菌群结构差异很大。本研究为利用微生物进行重金属污染水体的治理储备了微生物资源,为实现国家“美丽乡村”的建设目标提供一定的参考价值。     

Animal Board Invited Review: Meta-analysis of genetic parameters for resilience and efficiency traits in goats and sheep

Genetic selection focused purely on production traits has proven very successful in improving the productive performance of livestock. However, heightened environmental and infectious disease challenges have raised the need to also improve the resilience of animals to such external stressors, as well as their efficiency in utilising available resources. A better understanding of the relationship between efficiency and production and health traits is needed to properly account for it in breeding programmes and to produce animals that can maintain high production performance in a range of environmental conditions with minimal environmental footprint. The aim of this study was to perform a meta-analysis of genetic parameters for production, efficiency and health traits in sheep and goats. The dataset comprised 963 estimates of heritability and 572 genetic correlations collated from 162 published studies. A threelevel meta-analysis model was fitted. Pooled heritability estimates for milk production traits ranged between 0.27 ± 0.03 and 0.48 ± 0.13 in dairy goats and between 0.21 ± 0.06 and 0.33 ± 0.07 in dairy sheep. In meat sheep, the heritability of efficiency traits ranged from 0.09 ± 0.02 (prolificacy) up to 0.32 ± 0.14 (residual feed intake). For health traits, pooled heritability was 0.07 ± 0.01 (faecal egg count) and 0.21 ± 0.01 (somatic cell score) in dairy goats and 0.14 ± 0.04 (faecal egg count) and 0.13 ± 0.02 (somatic cell score) in dairy sheep. In meat sheep, the heritability of disease resistance and survival traits ranged between 0.07 ± 0.02 (mastitis) and 0.50 ± 0.10 (breech strike). Pooled estimates of genetic correlations between resilience and efficiency traits in dairy goats were not significantly different from zero with the exception of somatic cell score and fat content (?0.19 ± 0.01). In dairy sheep, only the unfavourable genetic correlation between somatic cell score and protein content (0.12 ± 0.03) was statistically significant. In meat sheep only, the correlations between growth and faecal egg count (?0.28 ± 0.11) as well as between growth and dagginess (?0.33 ± 0.13) were statistically significant and favourable. Results of this meta-analysis provide evidence of genetic antagonism between production and health in dairy sheep and goats. This was not observed in meat sheep where most of the pooled estimates had high standard errors and were non-significant. Based on the obtained results, it seems feasible to simultaneously improve efficiency and health in addition to production by including the different types of traits in the breeding goal. However, a better understanding of potential trade-offs between these traits would be beneficial. Particularly, more studies focused on reproduction and resilience traits linked to the animal’s multi-trait response to challenges are required.